Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Aoyagi, Kazuhei; Ishii, Eiichi
Dai-14-Kai Iwa No Rikigaku Kokunai Shimpojiumu Koen Rombunshu (Internet), 6 Pages, 2017/01
The objective of this research is to investigate the hydro-mechanical properties of excavation damaged zones (EDZs) along the galleries excavated in 250 m and 350 m depths. We conducted hydraulic tests, BTV observations and core analyses. As a result, in the 250 m gallery, the extent of the EDZ was 1.0 m into the gallery wall. The hydraulic conductivity was increased by 2 to 3 orders of magnitudes compared with that of intact rock. On the other hand, in the 350 m gallery, the extent of the EDZ was 0.4 m into the gallery wall; the hydraulic conductivity was increased by 5 orders of magnitudes compared with that of intact rock. We investaged the difference of the characteristics of the EDZs on the basis of competence factor and ductility index. As a result, it was estimated that an extent of an EDZ decreases with decrease of competence factor; a hydraulic conductivity in an EDZ increases with decrease of ductility index.
Nakashima, Hiroyoshi*; Koyama, Tomofumi*; Tatsuta, Keisuke*; Katayama, Tatsuo*; Aoyagi, Kazuhei
Dai-14-Kai Iwa No Rikigaku Kokunai Shimpojiumu Koen Rombunshu (Internet), 6 Pages, 2017/01
In this study, we created the three dimensional model based on equivalent continuum approach to study the penetration length and enhancement of the hydraulic conductivity of the rock mass. The developed numerical model was applied to the in situ grout injection conducted in the ventilation shaft of the Horonobe Underground Research Laboratory. We evaluated the hydraulic conductivity of the rock mass after the grout operation. As a result, hydraulic conductivity of the highly permeable fault was decreased in 4 orders of magnitude, which is almost consistent with the in situ hydraulic conductivity obtained from in situ Luegeon test after the grout injection. Thus the simulation method described in this paper can be applied to the evaluation of the efficiency of in situ grout injection.